If you are intrigued in any of our products or would like to discuss a prospective order, please feel totally free to make contact with us. Furthermore, all our production processes are in compliance with ISO9002 expectations. EPG was awarded with “famous merchandise of Zhejiang Province” and “popular model of Zhejiang Province”. Introduction:
one. HS collection slurry pump is developed for the steady pumping of higher abrasive, EPT slurries with nominal upkeep demands. The putting on parts are produced of extremely chrome or and rubber. It will keep large performance more than the use life of its factors.
2. The steel wet parts and rubber kinds can be interchangeable for handling various liquids or slurries.
3. HS slurry pumps are obtainable in measurements ranging from one inch to 18 inch discharge and attribute higher effectiveness performance capable of movement costs from 10.8 to 5400 m sup3/h and heads up to 125 meters for large head versions.
Characteristics:
one. Cylindrical framework of bearing assembly: practical to alter the room amongst impeller and JCEP liner
and can beremoved completely
two. Interchangeable anti-abrasive wet areas manufactured of large-chrome alloys
3. Casing halves of ductile iron with exterior reinforcing ribs supply high functioning stress abilities
and an additional measure of protection.
4. The discharge branch can be oriEPTTd to any eigEPTT positions at the interval of 45 degrees
5. A variety of EPT kinds: DC(direct relationship), V-belt EPT, EPT box EPTT, EPT couplings, VFD,
SCR management, and so forth
six. The shaft seal employs the EPTT seal, expeller seal and mechanical seal
Typical Application:
| #8226 Mineral processing | #8226 EPT | #8226 EPTT Washery | #8226 Cyclone feeds |
| #8226 Bentonite | #8226 EPTT slurry | #8226 EPTEPTTng | #8226 Mill grinding |
| #8226 Ash hXiHu (West EPT) Dis.Hu (West EPT) Dis. | #8226 Tunnel | #8226 Squander sludge | #8226 Coarse sand |
| #8226 Lime mud | #8226 Phosphoric acid | #8226 EPTT | #8226 EPTT |
| #8226 Alumina JCEP | #8226 EPTT Plant | #8226 Potash FerEPTTzer Plant | #8226 Other EPTT |
| #8226 Iron ore sand | #8226 JCEP Concentration | #8226 EPT EPT | #8226Molybdenum |
| Product | Max EPTT (Kw) |
Inlet amp Outlet dimension (inch) | EPT for Dress in Areas | Circulation Fee (Q) | EPT (H) meter |
Pace (RPM) |
EPTTeller Dia. (mm) |
|
| m sup3/hr | l/s | |||||||
| 25HS-B | 15 | one.five/one | M | 12.six~28.eight | three.five~8 | 6~68 | 1200~3800 | 152 |
| R | ten.8~25.2 | 3~7 | seven~fifty two | 1400~3400 | 152 | |||
| 40HS-B | fifteen | two/1.5 | M | 32.4~seventy two | 9~twenty | six~fifty eight | 1200~3200 | 184 |
| R | twenty five.two~fifty four | seven~fifteen | 5.5~41 | one thousand~2600 | 178 | |||
| 50HS-C | 30 | 3/2 | M | 39.six~86.four | eleven~24 | 12~64 | 1300~2700 | 214 |
| R | 36~seventy five.six | ten~21 | 13~forty six | 1300~2300 | 213 | |||
| 75HS-C | thirty | four/three | M | 86.four~198 | 24~fifty five | nine~52 | a thousand~2200 | 245 |
| R | 79.two~a hundred and eighty | 22~fifty | five~34.five | 800~1800 | 245 | |||
| 100HS-D | sixty | six/four | M | 162~360 | 40~a hundred | 12~fifty six | 800~1550 | 365 |
| R | one hundred forty four~324 | forty~ninety | 12~forty five | 800~1350 | 365 | |||
| 150HS-E | 120 | 8/six | M | 360~828 | one hundred~230 | ten~61 | five hundred~1140 | 510 |
| R | 324~720 | 90~200 | 7~49 | four hundred~a thousand | 510 | |||
| 200MS-E | 120 | 10/8 | M | 666~1440 | 185~400 | 14~60 | 600~1100 | 549 |
| 200HS-ST | 560 | 10/eight | M | 612~1368 | 170~380 | 11~sixty one | four hundred~850 | 686 |
| R | 540~1188 | a hundred and fifty~330 | twelve~fifty | four hundred~750 | 686 | |||
| 250HS-ST | 560 | 12/ten | M | 936~1980 | 260~550 | seven~sixty eight | 300~800 | 762 |
| R | 720~1620 | 200~450 | 7~45 | three hundred~650 | 762 | |||
| 300HS-TU | 560 | fourteen/twelve | M | 1260~2772 | 350~770 | 13~63 | three hundred~600 | 965 |
| R | 1152~2520 | 320~seven-hundred | 13~44 | three hundred~five hundred | 965 | |||
| 350HS-TU | 1200 | sixteen/fourteen | M | 1368~3060 | 380~850 | eleven~sixty three | 250~550 | 1067 |
| 450HS-TU | 1200 | twenty/eighteen | M | 2520~5400 | seven hundred~1500 | thirteen~fifty seven | two hundred~four hundred | 1370 |
| 25HHS-C | 30 | 1.five/one | M | 16.two~34.2 | four.5~9.five | twenty five~92 | 1400~2200 | 330 |
| 50HHS-D | 60 | 3/two | M | sixty eight.four~136.8 | 19~38 | 25~87 | 850~1400 | 457 |
| 75HHS-E | 120 | 4/three | M | 126~252 | 35~70 | 12~ninety seven | 600~1400 | 508 |
| 100HHS-E | one hundred twenty | six/4 | M | 324~720 | 90~200 | thirty~118 | 600~1000 | 711 |
| 150HHS-S | 560 | eight/six | M | 468-1008 | a hundred thirty~280 | 20~ninety four | 500~a thousand | 711 |
For the material of sporting areas,
quotM quot = metal, ultra chromium alloy quotR quot = anti-abrasive rubber
Speak to
Welcome to contact us any time for information.
Your inquiry will get our prompt consideration and response !
