Introduction:
1. HS collection slurry pump is designed for the constant pumping of higher abrasive, EPT slurries with minimum routine maintenance requirements. The wearing components are manufactured of extremely chrome or and rubber. It will maintain large efficiency in excess of the dress in lifestyle of its components.
2. The metal soaked parts and rubber ones can be interchangeable for handling various liquids or slurries.
three. HS slurry pumps are obtainable in dimensions ranging from one inch to eighteen inch discharge and feature higher effectiveness functionality able of movement rates from ten.eight to 5400 m sup3/h and heads up to 125 meters for substantial head versions.
Features:
1. Cylindrical framework of bearing assembly: convenient to change the area amongst impeller and JCEP liner
and can beremoved completely
two. Interchangeable anti-abrasive soaked areas produced of substantial-chrome alloys
3. Casing halves of ductile iron with exterior reinforcing ribs provide higher working strain capabilities
and an extra evaluate of protection.
4. The discharge department can be oriEPTTd to any eigEPTT positions at the interval of forty five levels
5. A variety of EPT kinds: DC(direct connection), V-belt EPT, EPT box EPTT, EPT couplings, VFD,
SCR control, and so forth
6. The shaft seal utilizes the EPTT seal, expeller seal and mechanical seal
Typical Software:
| #8226 Mineral processing | #8226 EPT | #8226 EPTT Washery | #8226 Cyclone feeds |
| #8226 Bentonite | #8226 EPTT slurry | #8226 EPTEPTTng | #8226 Mill grinding |
| #8226 Ash hXiHu (West EPT) Dis.Hu (West EPT) Dis. | #8226 Tunnel | #8226 Squander sludge | #8226 Coarse sand |
| #8226 Lime mud | #8226 Phosphoric acid | #8226 EPTT | #8226 EPTT |
| #8226 Alumina JCEP | #8226 EPTT Plant | #8226 Potash FerEPTTzer Plant | #8226 Other EPTT |
| #8226 Iron ore sand | #8226 JCEP Focus | #8226 EPT EPT | #8226Molybdenum |
| Product | Max EPTT (Kw) |
Inlet amp Outlet size (inch) | EPT for Wear Parts | Flow Charge (Q) | EPT (H) meter |
Velocity (RPM) |
EPTTeller Dia. (mm) |
|
| m sup3/hr | l/s | |||||||
| 25HS-B | 15 | 1.five/one | M | twelve.six~28.8 | 3.5~eight | six~sixty eight | 1200~3800 | 152 |
| R | 10.eight~twenty five.two | 3~7 | seven~52 | 1400~3400 | 152 | |||
| 40HS-B | fifteen | 2/one.5 | M | 32.four~seventy two | 9~20 | six~58 | 1200~3200 | 184 |
| R | 25.2~54 | seven~fifteen | 5.five~41 | one thousand~2600 | 178 | |||
| 50HS-C | thirty | three/2 | M | 39.6~86.4 | eleven~24 | 12~64 | 1300~2700 | 214 |
| R | 36~seventy five.6 | 10~21 | thirteen~46 | 1300~2300 | 213 | |||
| 75HS-C | 30 | four/three | M | 86.four~198 | 24~fifty five | 9~52 | 1000~2200 | 245 |
| R | seventy nine.two~a hundred and eighty | 22~50 | five~34.5 | 800~1800 | 245 | |||
| 100HS-D | 60 | six/4 | M | 162~360 | forty~a hundred | twelve~56 | 800~1550 | 365 |
| R | a hundred and forty four~324 | forty~ninety | 12~45 | 800~1350 | 365 | |||
| 150HS-E | a hundred and twenty | 8/6 | M | 360~828 | 100~230 | ten~61 | 500~1140 | 510 |
| R | 324~720 | ninety~two hundred | seven~forty nine | four hundred~a thousand | 510 | |||
| 200MS-E | a hundred and twenty | 10/eight | M | 666~1440 | 185~400 | 14~sixty | 600~1100 | 549 |
| 200HS-ST | 560 | 10/8 | M | 612~1368 | 170~380 | 11~sixty one | 400~850 | 686 |
| R | 540~1188 | a hundred and fifty~330 | 12~fifty | four hundred~750 | 686 | |||
| 250HS-ST | 560 | 12/ten | M | 936~1980 | 260~550 | seven~68 | 300~800 | 762 |
| R | 720~1620 | 200~450 | seven~45 | three hundred~650 | 762 | |||
| 300HS-TU | 560 | fourteen/12 | M | 1260~2772 | 350~770 | 13~63 | three hundred~600 | 965 |
| R | 1152~2520 | 320~seven hundred | thirteen~44 | three hundred~500 | 965 | |||
| 350HS-TU | 1200 | 16/14 | M | 1368~3060 | 380~850 | 11~sixty three | 250~550 | 1067 |
| 450HS-TU | 1200 | 20/eighteen | M | 2520~5400 | seven-hundred~1500 | 13~57 | 200~four hundred | 1370 |
| 25HHS-C | thirty | one.five/one | M | 16.2~34.two | four.five~9.5 | 25~92 | 1400~2200 | 330 |
| 50HHS-D | sixty | three/two | M | sixty eight.four~136.eight | 19~38 | 25~87 | 850~1400 | 457 |
| 75HHS-E | a hundred and twenty | four/three | M | 126~252 | 35~70 | 12~ninety seven | 600~1400 | 508 |
| 100HHS-E | 120 | 6/4 | M | 324~720 | 90~200 | thirty~118 | 600~a thousand | 711 |
| 150HHS-S | 560 | 8/six | M | 468-1008 | a hundred thirty~280 | 20~ninety four | 500~a thousand | 711 |
For the material of donning components,
quotM quot = steel, extremely chromium alloy quotR quot = anti-abrasive rubber
Make contact with
Welcome to contact us any time for particulars.
Your inquiry will get our prompt consideration and reaction !
